78(96)
forming on the surface of circulation pipe.
Electrical wire connection of water chiller should be done by qualified
electrician! Electrical wiring circuit should not be modified unless
authorized by our company. We shall not be reliable for machine
damages caused by unauthorized modification.
3.2 Schematic Drawing of Installation
Parts Name ：
1. Water chiller 2. Chilled water inlet 3. Chilled water outlet 4. Water outfall
5. Water refill port 6. Chilled water tower 7. Cooling water pump
8. Cooling water circulation 9. Chilled water circulation
10. Mould Cooling 11. Cooling tank 12. Oil Cooling
Picture 3-1：Installation Location
3.3 Power Supply
SIC-A-R2 series should be connected with 3φ 400V 50Hz power and earth wire
and null wire.
Attention!
Before connecting the machine with power supply, please make sure that
main switch is turned off!
To Next Page
Loading...
