Shini SIC-A-R2 - 4.5 Condenser and Evaporator Cleaning Step

85(96)
4.5 Condenser and Evaporator Cleaning Step
4.5.1 Tube-in-shell Condenser Cleaning
1. Ensure the float ball in water tank of the machine is closed, to prevent the
detergent solution from getting into the water tank of the machine.
2. Connect pipeline with hoses according to above picture.
3. Detergent and water (according to purchased detergent mixing requirement
for specific proportion) proportional to solution and pour into the opening
water tank, then start-up pump cleaning.
4.5.2 Tube-in-shell Evaporator Cleaning