Shini SIC-A-R2 - 4.4 Thermostat 1

83(96)
evaporated.)
3) Turn off the main switch.
Attention!
Avoid electrical shock when main switch is turned on.
Attention!
In order to reduce the possibilities of machine damage and prolong the
life, shut off the machine with correct methods.
4.4 Thermostat 1
Picture 4-3：Thermostat
4.4.1 Temperature Setting
Limits of SPL and SPH for setting points exist in any condition and set through
to acquire values of SPL and SPH.
Attention!
Notices: all parameters must be reset when temperature unit changed.