Need help?Do you have a question about the Shini SIC-A Series and is the answer not in the manual?
Explains the model naming convention for SIC-A chillers.
Lists standard and optional features of the SIC-A chillers.
Provides key technical specifications for the SIC-A series.
Details the physical dimensions of the SIC-A chillers.
Lists detailed specifications for SIC-A models (Part 1).
Outlines essential safety rules and precautions for operating the chillers.
Explains the meaning of various warning and attention labels on the unit.
Clarifies Shini's liability and responsibilities regarding product use.
Describes the primary functions and operation of the SIC-A chillers.
Explains the operational cycle and components of the refrigeration system.
Details the main components and their respective functions.
Details the compressor's role, type, and power specifications.
Explains the condenser's function and type (air-cooled tube-fin).
Describes the drying filter's purpose and placement.
Explains the function and location of the thermal expansion valve.
Details the evaporator's function and type (horizontal shell and tube).
Describes the function of the high and low pressure controllers.
Explains the purpose of the fluid reservoir in storing liquid refrigerants.
Lists optional components available for the SIC-A series.
Explains the use of the refrigerant indicator for filling and water ratio.
Describes the function of the liquid pipe solenoid valve for freeze prevention.
Explains the hot-gas bypass valve function for temperature control.
Details the flow switch's role in preventing system damage from circulation failure.
Explains how the liquid level indicator monitors water levels in the tank.
Identifies and describes the main electrical components of the chiller.
Explains the thermal overload relay's operation and reset procedure.
Provides essential guidelines and precautions for chiller installation.
Illustrates the typical machine installation location and connections.
Details the required power connection specifications and safety warnings.
Identifies and explains the function of each component on the control panel.
Provides step-by-step instructions for starting up the water chiller.
Explains the correct procedure for safely shutting down the machine.
Details the operation and settings for Temperature Controller 1.
Details how to set the temperature using the controller for 1-15HP models.
Lists and defines adjustable parameters for Temperature Controller 1.
Explains the procedure for setting parameters on Temperature Controller 1.
Provides a reference for error codes and their meanings displayed by the controller.
Details the operation and settings for Temperature Controller 2.
Details how to set the temperature using the controller for 20-50HP models.
Lists default parameter values for Temperature Controller 2.
Explains the procedure for setting parameters on Temperature Controller 2.
Details the procedure for vacuumizing and filling the refrigerant into the system.
Covers maintenance procedures for key components.
Instructions for cleaning and maintaining the condenser.
Instructions for cleaning and maintaining the evaporator.
Outlines a schedule for regular maintenance checks.
Section to record machine details like model, voltage, and production date.
Checklist for verifying installation correctness and electrical connections.
Daily maintenance tasks including switch functions and pressure gauges.
Weekly checks for electrical connections and alarm functions.
Monthly maintenance tasks including refrigerant pipes and pump sounds.
Checks to be performed every three months, such as condenser blockage.
Half-yearly maintenance including cleaning condenser, evaporator, and filter.
Annual check for contactor status.
Checks to be performed every three years, such as PC board renewal.
To Next Page
General
