Shini SIC-A Series - Temperature Controller 2(Used for 20 HP-50 HP); Temperature setting method

33(43)
4.5 Temperature Controller 2(
Used for
4.5.1 Temperature setting method
Picture 4-2 ：
Temperature Controller 2
Table 4-4 ： The Instruction of
Temperature Controller 2
Button
Code
Normal Operation
Press this button alone
Press it with other
buttons
1
Press it for 3 secs. at least:
startup/shutdown
Press and hold
it with the
defrost button 3
, to make
the forced cooling work or
stop
2
-1 sec.: display/ set the
value;
- Last more then 3 secs;
Enter the parameter setting
menu (input password 22)
- Set the audible alarm to
mute (buzzer)
-
3
- Last 3 secs at least: to
make the defrosting work
or stop
Press and hold it with the
compressor button 1
together to make the
forced cooling work or
stop
Used for
20HP-50HP)
Temperature Controller 2
Temperature Controller 2
Startup
Press it with other
buttons
it with the
, to make
the forced cooling work or
-
Press and hold
1 sec. to reset
current EZY
setting
Press and hold
(fan button 2
and defrost
button 3)
together to
activate the
parameter reset
program
Press and hold it with the
compressor button 1
together to make the
forced cooling work or
Press it for 1
sec. to display
the hardware
version