79(96)
4. Application and Operation
4.1 Control Panel
Picture 4-1：Control Panel
Table 4-1：Specification of Control Panel
No. Name Functions Remarks
1 Power indicator
Connect through power supply and turn
on the main switch, the indicator will
become bright.
Note: Do not disassemble any
electrical components or
terminals in case of electrical
shock.
2 Anti-phase indicator
It is used to indicate phase reversal or
phase shortage. The buzzer sounds
and system stops working.
Check the power supply and
exchange two of the live wires
to reset the alarm.
To Next Page
Loading...
