13(64)
Picture 1-2：Blower
1.4.3 Transportation and Storage of the Machine
Transportation
1) SMD-H series Mold Dehumidifier are packed in crates or plywood cases with
wooden pallet at the bottom, suitable for quick positioning by fork lift.
2) Optional floor stand with castors can be used for ease of movement.
3) Do not rotate the machine and avoid collision with other objects during
transportation to prevent improper functioning.
4) The structure of the machine is well-balanced, although it should also be
handled with care when lifting the machine for fear of falling down.
5) The machine and its attached parts can be kept at a temperature from -25 ℃
to +55 for long distance transportation and for a short distance, it can be ℃
transported with temperature under +70.℃
Storage
1) SMD-H series Mold Dehumidifier should be stored indoors with temperature
kept from 5℃ to 40℃ and humidity below 80%.
2) Disconnect all power supply and turn off main switch and control switch.
3) Keep the whole machine, especially the electrical components away from
water to avoid potential troubles caused by the water.
4) Plastic film should be used to protect the machine from dust and rains.
Working environment
The machine should be operated
1) Indoors in a dry environment with max. temperature +45℃ and humidity no
more than 80%.
To Next Page
Loading...
Need help?
General
