Shini Mold Sweat Dehumidifier
Honeycomb Rotor
Note
*
DehumidifyingAir Quantity (m
3
/hr)
D=Dew-point Monitor CE=Conformity
1.2 Feature
1) Standard configuration
● Accurate control and display of regenerative temp. by using P.I.D. control.
● Honeycomb rotor is used to ensure constant air dehumidifying effect.
● Microprocessor board is fitted to indicate machine running status and to
diagnose malfunctions.
● Motor overload and phase reverse alarm functions are included.
● Return air cooling and filtering are included.
● Under normal state and atmospheric conditions, the humidity content of air
can be controlled exactly all year round.
● Inhibits corrosion and prolongs service life of the mould, and yet reduces
moulding cycle time.
● Air temperature generated by this series of machine is about 30℃, this
ensures moisture condensation in the moulding area will not occur on the
view window of the moulding machine.
2) Accessory option
● Return air collector is optional, a return air collector is used to collect return
air from the moulding area back to this machine and to form a closed-loop air
circulation, which is particularly practical in tropical climate.
● Dew-point monitor can be fitted as option to detect dry air quality.
To Next Page
Loading...
Need help?
General
