42(64)
Note! Keep the machine 1m from the combustible distance.
3.2 Installation Diagram
Picture 3-2：Installation Diagram
3.3 Installation
3.3.1 What is Honeycomb-rotor
The main body of the honeycomb-rotor is a honeycomb, made by ceramic fibre
and organic additives, sintered under high temperature with molecular sieve and
silica gel, to be strongly bonded together and form a solid and hard surface. Not
like common molecular sieve, which will produce dusts and fines to pollute raw
materials when aging or become saturated requiring regular replacement,
honeycomb-rotor offer unlimited long life and can be cleaned when it is polluted.
The moisture of return air is quick absorbed by numerous tunnels before coming
out of the rotor to form low dew-point air. At the same time, regenerating blower
takes dry air into the honeycomb-rotor from an opposite direction to regenerate
the rotor.
To Next Page
Loading...
Need help?
General
