Shining 3D Aoralscan 3 - Page 22

Aoralscan 3_Manual_V1.0.0.30 - 16 -
Aoralscan 3 is intended to be used in the following electromagnetic environment. The purchaser
or user of Aoralscan 3 should ensure that it is used in this electromagnetic environment:
Immunity test
IEC 60601 test levels
Compliance level
Electromagnetic environment –
guidance
Conducted RF
3 Vrms
150 kHz to
80 MHz outside ISM
bands
3 Vrms
Portable and mobile RF
communications equipment
should be used no closer to any
part of the Aoralscan,
including cables, than the
recommended separation
distance calculated from the
equation appliance to the
frequency of the transmitter.
Recommended separation
distance:
d = 1.2 √P