Aoralscan 3_Manual_V1.0.0.30 - 22 -
3. Unpack the Package
Check the carry box for the following items. If any item is missing or damaged, contact the
distributor or service provider immediately.
1. 1 x Intraoral Scanner with a USB 3.0 cable (length: 2m)
2. 1 x protection cap
3. Scanner heads (4 standard scanner heads and 1 small scanner head)
4. 1 x scanner pedestal
5. 1 x AC/DC power adapter (input: 100-240 V, 50-60 Hz, 1.0 A; output: 12 V DC, 3 A; power
cord length: 1.5 m)
6. 5 x power cord plugs
7. 1 x calibrator
8. 1 x USB flash drive (the software carrier)
9. 1 x USB 3.0 cable. Use it together with the calibrator.
10. 1 x relay box
11. 1 x package box
WARNINGS
⚫ AC plug types vary by country/region.
⚫ Using accessories, peripherals, or cables not supplied with the product or recommended
by Shining3D Corporation can affect the device in the form of increased emissions or decreased
To Next Page
Loading...
