Shinko ACD-13A Communication Instruction Manual

1
COMMUNICATION INSTRUCTION MANUAL ACD/R-13A, ACD/R-15A (C, C5)
No. ACDR1CE8 2020.03
This manual contains instructions for communication functions of the ACD-13A, ACR-13A, ACD-15A and ACR-15A.
Serial communication and Console communication cannot be used together.
When performing Serial communication, remove the exclusive cable (CMB) from the USB port of the PC and
console connector of the ACD/R-13A, ACD/R-15A.
When performing Console communication, it is not required to remove the Serial communication cables.
However, do not send a command from the master side.
1. System Configuration
1.1 RS-232C (C option)
(Fig. 1.1-1)
1.2 RS-485 Multi-Drop Connection Communication (C5 option)
(Fig. 1.2-1)
(Fig. 1.2-2)
2. Wiring
2.1 RS-232C (C option)
• D-sub 9-pin connector • D-sub 25-pin connector
(Fig. 2.1-1) (Fig. 2.1-2)
Communication converter
IF-400
(Sold separately)
RS-232C
RS-485
No. 0
No. 1
No. 30
ACD-13A, ACR-13A
ACD-15A, ACR-15A
Host computer
Host computer
RS-232C
ACD-13A, ACR-13A
ACD-15A, ACR-15A
USB communication cable
CMC-001-1 (sold separately)
No. 0
No. 1
No. 30
ACD-13A, ACR-13A
ACD-15A, ACR-15A
Host computer
13 TX
14 RX
15 SG
1 GND
Host computer
ACD-13A, ACR-13A
ACD
-15A, ACR-15A
Shield
wire
FG
13 TX
14 RX
15 SG
H
ost computer
ACD-13A, ACR-13A
AC
D-15A, ACR-15A
Shi
eld wire

Shinko ACD-13A Specifications

General

Brand	Shinko
Model	ACD-13A
Category	Controller
Language	English