10
1 SOFT MODE
For operating in flat water and light chop
where the likelihood of experiencing a
slam is low. Mostly inshore use. Gives a
soft ride.
2 MEDIUM MODE
For operating in moderate to rough
conditions where some slamming could
occur. Gives a medium ride.
3 FIRM MODE
For operating in big seas and at higher
speeds where regular slamming will
occur. Gives a firm ride.
Setting the sag height is designed to be a starting point. To get the most out of the suspension module the shock absorber can be
fine-tuned. This is done using a combination of compression and rebound tuning to optimize ride quality as well
as for varying sea conditions.
The suspension module comes with a 3-position blue lever that is designed to make
quick adjustments to optimize the performance of the shock absorber in varying sea
conditions. You can select three settings:
SHOCK COMPRESSION ADJUSTMENT SETTINGS
To Next Page
Loading...