ShoreStation SS1053 User Manual

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004405
Page 1 of 12 Rev B 11/05/2013
SS1053 - HOIST PWC DOCK MOUNT
Your ShoreStation PWC Boat Hoist is designed to give years of dependable service. Following the
instructions in the operator’s manual will insure its dependability and more important, YOUR safety.
Read through this entire operator’s manual before attempting to operate your hoist. Our goal is your
safety - help us help you by knowing and observing the operating precautions and limitations you
will find listed herein. If you do not understand any of these instructions, please ask your dealer for
his personal attention to your questions.
Midwest Industries, Inc.
Ida Grove, IA 51445

ShoreStation SS1053 Specifications

General

Brand	ShoreStation
Model	SS1053
Category	Lifting Systems
Language	English

Summary

Introduction to the ShoreStation PWC Hoist

Parts Identification Diagram

Parts List and Assembly Tools

Tools Required for Assembly

Lists the essential tools needed for the safe and effective assembly of the hoist.

Comprehensive Parts List

Detailed list of all parts with item numbers, part numbers, descriptions, quantities, and notes.

Core Assembly Steps

Mounting Lower Frame and Guide Post

Instructions for attaching the lower frame weldment and guide post tube to the hoist structure.

Cable Routing and Securing

Guidance on routing the hoist cable and securing its end within the guide post.

Winch Mechanism Installation

Cable Path Around Platform Pulley

Directs the cable path around the platform pulley and down the extrusion for securing.

Mounting Winch Assembly to Post

Details on attaching the winch mounting plate and the winch assembly to the winch post extrusion.

Manual Winch Assembly Details

Manual Winch Components Diagram

Exploded view of the manual winch components and their assembly sequence.

Stop Bracket and Bunk Mounting

Instructions for installing the stop bracket and attaching the bunk assembly to the platform.

Electric DC Winch Information

Safety and Maintenance Procedures

Seasonal Safety Maintenance Checks

Recommended annual inspections for hoist bolts, pulleys, cables, frame, and winch.

Operational Safety Tips and Testing

Crucial safety advice on hoist operation, boat positioning, and winch behavior to prevent injury.

Classic Dock Mount Installation Guide

Dock Mount Tube Installation

Steps to attach the PWC dock mount tube between the dock and bumper using specific hardware.

Hoist Attach Plate Mounting

Instructions for mounting hoist attach plates onto the winch post mounting channel.

ShoreBridge Dock Mount Installation Guide

Securing ShoreBridge Dock Section

Details on using u-bolts and hex nuts to secure the Shorebridge dock section to the mount tube.

Final Hoist Positioning and Tightening

Steps to align the hoist, insert flanges, and tighten lock nuts for secure positioning.

Universal Dock Mount Installation Guide

Winch Plate and Hoist Plate Attachment

Instructions for attaching the winch post mounting plate and hoist attach plates to the dock angle.

Dock Bumpers and Angle Securing

Steps for mounting dock bumpers and the dock mounting angle using specified hardware.

PWC Positioning and Final Safety

Determining PWC Center of Gravity

Methods for finding the PWC's center of gravity to ensure proper hoist positioning.

Critical Safety Precautions Review

Essential safety rules to follow before operating the hoist, covering general use and specific warnings.