2.Host Controller
1) Description
2) Host Controller Introduction – Standard or Pro Version
1. ZK6200/ZK6300 Host Controller is an intelligent system specially designed for the multi-effects and remote control of
Sparkular series machine, so as to create the simulation and demonstration of sparks effects. The audio trigger and timing
code trigger can be used to control the synchronous with music. LAN ports can be used to extend the communication
among multi host controllers.
a) Standard DMX512 signal output
b) Support 18 units Sparkular at the same time (ZK6300 54 units).
c) Five standard dynamic effect modes: Synchronization, Center to Ends, Ends to Center, Left to right, Right To Left,
Special Effects and one user-definable special effect mode (together with SPARKULAREdit 200 software from
SHOWVEN), supports 8 files and each file supports 36000 lines at maximum (special effects last for 30 minutes)
d) There are multiple optional trigger sources. Hand, Music or Midi Inputs.
e) Support simulation function and LED display.
f) Monitoring function: Host controller with RDMX function, can feedback status information such as Temp., error
message etc. of each machine.
g) Emergency stop function: Pause or Stop Button.
Model ZK6200
Dimension 390 x 300 x 110mm
Weight 3.5kg
Input AC 110V-240V, 50/60Hz
Work Power 15W
Work Temp. -10℃~50℃
Ports 2 CAN communication ports,
1 USB port,
2 media ports(trigger by music),
2 MIDI ports(trigger by music),
2 DMX512 output ports, Ethernet.
Support max. 200m communication cable
Battery 3350mAH
Lifetime >3 years
8
To Next Page
Loading...
