*For better performance of SPARKULAR, please don’t change the default value of density without permission
from SHOWVEN.
Press “MENU” for 3 seconds, operator can enter the Advanced Interface. Press “MENU” switch to different
options, and press “MENU” for 3 seconds, return to the main interface.
c) Advanced Interface：
Option
Set Temperature
Wireless Control
LCD Backlight
Density@ Height 1
Range Explanation
Density@ Height 2
Density@ Height 3
Density@ Height 4
Density@ Height 5
Density@ Height 6
Density@ Height 7
Density@ Height 8
Density@ Height 9
Density@ Height 9
Mode Selection
Default Parameter
Motor Protect
Power Selection
Range
On/Off
On/Off
30-50
30-50
30-50
30-60
30-70
40-100
40-100
40-100
40-100
40-100
Factory Mode
User Mode
On/Off
220/110Vac
Setup SPARKULAR inner core temperature
Wireless On/Off, for wireless version only
LCD Backlight On/Off
Adjusts the sparks density of Height gear 1*
Adjusts the sparks density of Height gear 2*
Adjusts the sparks density of Height gear 3*
Adjusts the sparks density of Height gear 4*
Adjusts the sparks density of Height gear 5*
Adjusts the sparks density of Height gear 6*
Adjusts the sparks density of Height gear 7*
Adjusts the sparks density of Height gear 8*
Adjusts the sparks density of Height gear 9*
Adjusts the sparks density of Height gear 10*
Factory mode is for engineer only. When in Factory mode
machine can’t controlled by DMX console/host controller
Press ENTER in this interface, all parameter of machine
restore to default value.
Motor protect function, default setting is Off
Select input power supply voltage.
Default setting for BT01 is 220VAC. BT02 is 110VAC.
6
To Next Page
Loading...
