Need help?Do you have a question about the Showven Sparkular and is the answer not in the manual?
General| Effect Height | Adjustable |
|---|---|
| Housing Material | Metal |
| Operating Temperature | 0°C to 40°C |
| Effect Type | Cold Spark Effect |
| Voltage | AC220V, 50/60Hz |
| Control | DMX, Remote Control |
| Warm-up Time | Less than 5 minutes |
| Operation Time | Continuous |
| Consumable | Granulate |
| Power Source | Electric |
| DMX Channels | 2 |
| Dimensions | 200mm x 250mm x 320mm |
| Safety Features | Multiple safety sensors, overheat protection |
Explains the function of each LED indicator (READY, DMX, FAULT, HEAT) on the operation panel.
Describes the function of the control buttons: MENU, DOWN, UP, ENTER for navigation and selection.
Details the connection ports for DMX IN/OUT, POWER IN/OUT, and their functions.
Lists error codes (E0-E7) and their corresponding explanations for troubleshooting.
Covers DMX address, fountain height, manual control, and material clearing.
Includes temperature, wireless, LCD backlight, density, mode selection, and parameter reset.
Instructions for filling the Sparkular hopper with HC8200 consumables, detailing types and effect heights.
Process for swiping RFID card, activating the machine, and firing effects via the host controller.
To Next Page
