HOST CONTROLLER
▲Description
The Host Controller is an intelligent system specially designed for the multi-effects and remote
control of SPARKULAR series products, so as to realize the simulation and demonstration of
multi dynamic effects. The Host Controller has multiple interface types and control mode
adapting to modern stage, except DMX communication, it can also be triggered by Audio and
MIDI time code to achieve music synchronization, and use LAN to achieve collaboration and
communication between multiple host controllers.
▲Technical Specifications
\ MODEL: ZK6200/ZK6300
\ DIMENSION: 390×300×110mm
\ WEIGHT: 3.5kg
\ VOLTAGE: 100-240V, 50/60Hz
\ POWER: 15W
\ MAX CASCADE OF SPARKULAR: 18units (ZK6200)/ 54units (ZK6300)
\ SUPPORT MACHINES: SPARKULAR series, CIRCLE FLAMER series, SONICBOOM series
▲Host Controller Introduction – Standard or Pro Version
1. Standard DMX512 signal output
2. Support 18 units Sparkular at the same time (ZK6300 54 units).
3. Five standard dynamic effect modes: Synchronization, Center to Ends, Ends to Center, Left to
right, Right To Left, Special Effects and one user-definable special effect mode (together with
SPARKULAR Edit 200 software from SHOWVEN), supports 8 files and each file supports 36000
lines at maximum (special effects last for 30 minutes)
4. There are multiple optional trigger sources. Hand, Music or Midi Inputs.
5. Support simulation function and LED display.
6. Monitoring function: Host controller with RDMX function, can feedback status information
such as Temp., error message etc. of each machine.
7. Emergency stop function: Pause or Stop Button.
To Next Page
Loading...
