Shure Incorporated
12/24
1.
2.
3.
•
•
•
•
1.
2.
Encryption
Audio is encrypted with the Advanced Encryption Standard (AES-256), as specified by the US Government National Institute of
Standards and Technology (NIST) publication FIPS-197. Shure devices that support encryption require a passphrase to make
a connection. Encryption is not supported with third-party devices.
To activate encryption:
Open the Settings menu and select the General tab.
Select Enable Encryption.
Enter a passphrase. All devices must use the same passphrase to establish an encrypted connection.
Important: For encryption to work, all Shure devices on your network must use encryption.
If you’re using Shure Designer software to configure your system, please check the Designer help section for more about this topic.
Software Installation, Management, and Security
Software Installation and Device Discovery
The Shure Web Device Discovery application is used to access the web application for a Shure device. The web application
opens in a web browser to provide comprehensive device management. Any computer networked to the device can access the
GUI with this application.
Compatible Browsers:
Chrome
Safari
Firefox
Internet Explorer
Install the Shure device discovery application, available at www.shure.com
Double-click the component to open the interface.
Accessing the Web Application
The Shure Web Server Discovery application finds all Shure devices on the network that feature a web-based GUI. Follow
these steps to install the software and access the web application:
① Install the Shure Discovery application
Download and install the Shure Discovery application from www.shure.com. This automatically installs the required Bonjour
device discovery tool on the computer.
② Connect the network
Ensure the computer and the hardware are on the same network.
③ Launch the Discovery application
The app displays all Shure devices that feature a GUI.
④ Identify the hardware
Double-click on a device to open its GUI in a web browser.
To Next Page
