Shure Incorporated
22/24
Sampling Rate 48 kHz
Bit Depth 24
Latency
Does not include Dante latency
0.71 ms
Dynamic Range (Dante-to-Analog)
20 Hz to 20 kHz, A-weighted, typical
117 dB
Total Harmonic Distortion
@ 1 kHz, -20 dBFS Output, 0 dB analog gain
<0.05%
Output Clipping Level
Line +20 dBV
Aux +0 dBV
Mic -26 dBV
Analog Output Level
Selectable
Line 0 dB
Aux - 20 dB
Mic -46 dB
Output Impedance
150 Ω
Built-in Digital Signal Processing
Per Channel Equalizer (4-band Parametric), Mute, Invert Polarity, Gain (140 dB range)
System Audio Summing
Networking
Cable Requirements
Cat 5e or higher (shielded cable recommended)
IP Ports and Protocols
Shure Control
Port TCP/UDP Protocol Description
Factory De
fault
21 tcp FTP Required for firmware updates (otherwise closed) Closed
To Next Page
Loading...
