Shure Microflex MXN5W-C - Routing to Each Loudspeaker Individually; Routing Signals Loudspeaker to Loudspeaker

Shure Incorporated
14/26
•
•
•
Routing to Each Loudspeaker Individually
Use this method when:
Signal comes from device with Brooklyn II chip, such as a P300 or
Signal comes from device with Ultimo chip transmitting in multicast
Learn more about Dante flows in our FAQs or from Audinate.
Ifyou'reusingaShureP300orotherdeviceswithhighunicastDanteflowlimits,routeasignaltoeachloudspeakerindividual-
ly using Designer or Dante Controller.
Routing Signals from Loudspeaker to Loudspeaker
Use this method when:
Signal comes from device with Ultimo chip transmitting in unicast, such as Shure ANI
Learn more about Dante flows in our FAQs or from Audinate.
If you encounter unicast Dante flow limits, route from one loudspeaker to another using the Dante output channel.