Shure Incorporated
19/26
1.
2.
3.
•
•
Encryption
Encryptionoperatesattheroomlevel,meaningthatalldevicesincludedintheroommusthavethesesettings.Audioisen-
crypted with the Advanced Encryption Standard (AES -256), as specified by the US Government National Institute of Standards
and Technology (NIST) publication FIPS-197. Encryption is not supported with third-party devices.
To activate encryption:
In a room, click (Settings), located in the upper right.
Select Audio encryption.
Select Enable Encryption.
The other options allow you to re-key the encryption or disable it if encryption had previously been enabled and you no longer
want it.
Important: For encryption to work:
Encryption must be universally enabled or disabled on all connected Shure devices in the same room.
AES67 must be disabled in Dante Controller to turn encryption on or off. AES67 encryption is currently not supported.