Shure MV5-DIG User Manual

Shure Incorporated
9/13
•
•
•
•
•
•
•
•
•
•
•
•
•
Troubleshooting
Issue Solution
The display does not illumi
nate
Make sure that the MV5 is fully plugged in.
Audio is too low
Check the computer sound control panel settings. When first connecting the MV5 to your
computer, make sure to raise the computer volume level.
Audio sounds bad
Check the sound control panel of the computer to ensure that the MV5 is fully plugged in
and recognized.
Audio is distorted
Use the audio meter to ensure that volume peaks are within the target range. If level is
reaching the red peak indicator of the input meter, turn the gain down.
Audio sounds unnatural or
jittery
Make sure that the sample rate and bit depth microphone settings, found in the sound
control panel of the computer, are consistent with the sample rate and bit depth selected
in your software.
MV5 is plugged in, but the
volume meter does not regis
ter a signal.
Edit the privacy setting for the iOS device under SETTINGS > PRIVACY > MICROPHONE
to give the recording application permission to use the microphone.
Device not working with USB
hub.
TheMV5requires250mAperport.CheckUSBhubdocumentationforcurrent/portspeci
fication.
System Requirements
System Requirements and Compatibility: Mac
MacOS 10.13 to 10.15
64 bit
Minimum 2 GB of RAM
Minimum 500 MB of hard disk space
System Requirements and Compatibility: Windows
Windows 10
64 bit
Minimum 2 GB of RAM
Minimum 500 MB of hard disk space
System Requirements and Compatibility: iOS
iOS: iOS 14 and higher
iPhone: iPhone 6s and higher
iPod Touch: 7th gen
iPad: iPad 5th gen and higher
iPad Mini: iPad Mini 4th gen and higher

Shure MV5-DIG Specifications

General

Brand	Shure
Model	MV5-DIG
Category	Microphone
Language	English