Need help?Do you have a question about the Shure MXA710 Series and is the answer not in the manual?
General| Type | Linear Array Microphone |
|---|---|
| Channels | 8 |
| Connector Type | RJ45 |
| Frequency Response | 50 Hz to 20 kHz |
| Polar Pattern | Steerable Coverage |
| Connectivity | Dante, AES67 |
| Mounting Options | Wall, Ceiling, Table |
| Power Requirements | Power over Ethernet (PoE) |
Connect to a PoE port and use Designer to find the MXA710 on the network.
Use Designer's Optimize workflow to route audio signals and apply DSP settings.
Use the Coverage map in Designer to adjust lobe position, width, and gain.
Lists key features of the MXA710, including Steerable Coverage, Autofocus, and IntelliMix DSP.
Instructions on how to access and use the reset button.
Details room size, lobe count, and talker distance recommendations for optimal placement.
Offers tips for optimal placement and coverage planning, considering room acoustics.
Step-by-step guide and required materials for ceiling suspension.
Instructions for mounting the bracket on a wall, including junction box placement.
Steps to connect and access the MXA710 in Shure Designer software.
Instructions on navigating to the coverage map feature in Designer.
How to adjust lobe width, position, and gain in the Properties panel.
Recommendations for applying DSP blocks effectively.
Explains the function of AEC in reducing echo in conference calls.
Guidance on providing a reference signal for AEC processing.
Details how Automatic Gain Control adjusts channel levels.
Configuration options for automixing, including Gating Sensitivity and Hold Time.
To Next Page