Do you have a question about the Shure MXA920 and is the answer not in the manual?
Type | Conference microphone |
---|---|
Self noise | 18.24 dB |
Sample rate | 48 kHz |
Sensitivity (1kHz) | -1.74 mV/Pa |
Microphone frequency | 125 - 20000 Hz |
Power consumption (typical) | 10.1 W |
Signal-to-Noise Ratio (SNR) | 75.76 dB |
Storage temperature (T-T) | -29 - 74 °C |
Operating temperature (T-T) | -6.7 - 40 °C |
Power source | PoE |
Device interface | RJ-45 |
Connectivity technology | Wired |
Product color | White |
Echo cancellation | Yes |
Channels | 10 |
Width | 593.8 mm |
---|---|
Height | 54.69 mm |
Microphone weight | 5400 g |
Step-by-step guide for connecting MXA920 and P300 using Designer software.
Use Designer's auto-route for audio and set up coverage areas.
Access web app for microphone setup, coverage, and audio routing.
Details on LED indicators, ports, mounting features, and accessories.
Device requirements and delivery methods for PoE power.
List of models, included items, and optional parts.
Reset procedures, Designer software, and web application control.
Aligning mute status between Shure devices and conferencing software.
Setting up dynamic/dedicated coverage areas for optimal audio pickup.
Using coverage areas to mute or block unwanted room sounds.
Manually positioning lobes and adjusting microphone gain levels.
Adjusting gain and EQ with automatic coverage on or off.
Overview of DSP blocks: AEC, AGC, Noise Reduction, Compressor, Delay.
Automix channel mixing and detailed settings adjustments.
Placement best practices, height, and various mounting methods.
Enabling AES-256 encryption and setting up 802.1X for network authentication.
Networking best practices, switches, cables, IP configuration, and latency.
Dante QoS, IP ports, AES67 standard, and sending audio.
Solutions for common problems and access to additional resources.
General specifications, frequency response, dimensions, and critical safety instructions.