Shure Incorporated
45/50
•
•
•
•
•
•
•
•
•
Problem Solution
No lights
Go to [Your device] > Settings > Lights. Check if
brightness is disabled or if any other settings are turned off.
If the device is in a room using Designer's call status feature,
mute status LEDs are off when not in a call.
Web application lags in Google Chrome browser Turn off hardware acceleration option in Chrome.
Additional Resources
Shure Knowledge Base FAQs
Command strings for Shure devices
Shure Enterprise Networking Troubleshooting Checklist
Training from the Shure Audio Institute
Shure Systems YouTube channel
Download Shure Software
Shure Designer
Shure Update Utility
Shure Web Device Discovery
Software and firmware archive
Specifications
General
Coverage Type
Automatic or steerable
Power Requirements
Power over Ethernet (PoE), Class 0
Power Consumption
10.1 W maximum
Control Software
Designer or web application
Cable Requirements
Cat5e or higher (shielded cable recommended)
Connector Type
RJ45
To Next Page
