Page 3
CHANGING PRESETS
The format to change presets is as follows:
C
n
h
pp
h
Where
n
is the device ID set via the DIP switches on the P4800 unit (0 to 15), and
pp
is the preset number minus one.
pp
has a range from 0 to 127.
For example, if the P4800 is set to device ID 15 and preset #3 is desired, the string would look like:
AMX:
SEND_STRING P4800,”$CF,$02”
Crestron (SIMPL):
\xCF\x02
Once the command is sent, the P4800 will echo the command and then send a return string to acknowledge the change.
To Next Page
Loading...
