Shure Incorporated
8/21
Access the gain adjustment switch by unscrewing the head of the microphone.
Two gain settings are available on the PGX2. Use the tip of a pen or a small screwdriver to move the switch.
• 0dB: For quiet to normal vocal performance.
• –10dB: Use only if audio is distorted due to high voal levels.
Single System Setup
1 Scan
Use the scan feature on the receiver to find a clear channel.
a LED screen displays current channel
b press channel button to scan for a clear channel
c system scans for the channel with the least interference
2 Synchronize
Synchronize the transmitter to the receiver by aligning the infrared (IR) ports and pressing the sync button. Make
sure the IR ports are closely aligned.
After a successful sync, the transmitter LED momentarily flashes red and the receiver ready light illuminates.