Shure PGX Wireless User Manual (English)

Other manuals for Shure PGX Wireless

User Guide18 pages

Quick Setup21 pages

Questions and Answers:

R
Ronald DavisAug 15, 2025
Why does my Shure PGX Wireless Microphone system have distortion or unwanted noise bursts?
- B
  Barry PooleAug 15, 2025
  If your Shure Microphone system exhibits distortion or unwanted noise bursts, consider the following: * Eliminate nearby RF interference sources like CD players, computers, digital effects, or in-ear monitor systems. * Try changing the frequency of both the receiver and the transmitter. * Reduce the transmitter gain. * Replace the transmitter batteries. * If you're using multiple systems, change the frequency of one of the active systems.
E
Eddie SandersAug 18, 2025
What to do if the transmitter power light is off on my Shure PGX Wireless Microphone system?
- C
  Cynthia ColeAug 18, 2025
  If the transmitter power light is off on your Shure Microphone system, try the following: * Turn on the transmitter. * Ensure that the +/– indicators on the batteries align correctly with the transmitter terminals. * Insert fresh batteries.
J
Jacob GardnerAug 21, 2025
Why is the transmitter power light glowing or flashing red on my Shure PGX Wireless?
- C
  Carrie MillerAug 21, 2025
  If the transmitter power light on your Shure Microphone system is glowing or flashing red: * Replace the transmitter batteries. * If the indicator continues flashing red after replacing the batteries, it's possible that the transmitter and receiver are from incompatible frequency bands. Contact your Shure reseller for assistance.
M
Michael CurryAug 25, 2025
How to fix no sound on Shure Microphone system?
- K
  Kristin HaysAug 26, 2025
  If you are experiencing no sound or faint sound from your Shure Microphone system: * Perform automatic transmitter setup. * Verify all sound system connections.
D
Derek SmithAug 27, 2025
What to do if the receiver LED is off on Shure PGX Wireless?
- S
  Sandra MartinAug 27, 2025
  If the receiver LED is off on your Shure Microphone system: * Ensure the AC adapter is securely plugged into both the electrical outlet and the DC input connector on the rear panel of the receiver. * Confirm that the AC electrical outlet is functional and supplying the correct voltage.
K
Kenneth GallegosAug 30, 2025
Why is there distortion or unwanted noise bursts with my Shure Microphone system?
- B
  Brittney ChaneyAug 30, 2025
  Distortion or unwanted noise bursts can occur due to several reasons. Try the following: * Remove nearby sources of RF interference such as CD players, computers, digital effects, or in-ear monitor systems. * Change the receiver and transmitter to a different frequency. * Reduce transmitter gain. * Replace the transmitter batteries. * If using multiple systems, change the frequency of one of the active systems.
N
nandersonSep 2, 2025
What to do if my Shure PGX Wireless Microphone system has no sound or faint sound?
- J
  Jocelyn LeonardSep 2, 2025
  If you are experiencing no sound or faint sound with your Shure Microphone system, try the following: * Replace transmitter batteries * Turn on transmitter * Make sure the +/- indicators on batteries match the transmitter terminals * Insert fresh batteries If the indicator continues flashing red after batteries are replaced, the transmitter and receiver may belong to incompatible frequency bands. Contact your Shure reseller for assistance.
C
Christopher SmithSep 5, 2025
Why does my Shure PGX Wireless Microphone system have distortion or unwanted noise?
- S
  Sarah MorrisSep 5, 2025
  If you are experiencing distortion or unwanted noise bursts with your Shure Microphone system, try the following: 1. Eliminate any nearby sources of RF interference, such as CD players, computers, digital effects, or in-ear monitor systems. 2. Switch the receiver and transmitter to a different frequency. 3. Reduce the transmitter gain. 4. Replace the transmitter batteries. 5. If using multiple systems, change the frequency of one of the active systems.
C
Cheryl AvilaSep 8, 2025
What to do if Shure PGX Wireless transmitter power light is off?
- C
  charlesmonroeSep 8, 2025
  If the transmitter power light is off on your Shure Microphone system: * First, ensure the transmitter is turned on. * Then, check that the +/- indicators on the batteries match the transmitter terminals. * Finally, insert fresh batteries.

Shure PGX Wireless Specifications

General

Operating Range	Up to 100 meters (line of sight)
Transmitter Type	Handheld or Bodypack
Dynamic Range	>100 dB
Transmitter Power	10 mW
Receiver Output	Balanced XLR and unbalanced 1/4"
Signal-to-Noise Ratio	>100 dB