Shure PGX Wireless Quick Start Guide

8
Troubleshooting
Issue Indicator
Status
Solution
No sound
orfaint
sound
Transmitter power
light on, receiver
LEDson
• Performautomatictransmittersetup
• Verifyallsoundsystemconnections
ReceiverLEDoff • Make sure AC adapter is securly plugged into electrical outlet
• Make sure AC electrical outlet works and is supplying proper voltage
Transmitter power
light glowing or
flashingred
• Replace transmitter batteries
• Ifindicatorcontinuesflashingredafterbatteriesarereplaced,thetransmitter
andreceivermaybelongtoincompatiblefrequencybands.Contactyour
Shureresellerforassistance.
Transmitter power
lightoff
• Turn on transmitter
• Make sure the +/- indicators on batteries match the transmitter terminals
• Insertfreshbatteries
Distortion
or
unwanted
noise
bursts
N/A • RemovenearbysourcesofRFinterferance(CDplayers,computers,digital
effects,in-earmonitorsystems,etc.)
• ‣Changereceiverandtransmittertoadifferentfrequency
• ‣Reducetransmittergain
• ‣Replacetransmitterbatteries
• ‣Ifusingmultiplesystems,changethefrequencyofoneoftheactive
systems
Distortion
increases
gradually
Transmitter power
light glowing or
flashingred
Replace transmitter batteries
Sound level
different
fromcabled
guitar or
microphone
or when
using
different
guitars
Adjusttransmittergainasnecessary
Cannot turn
transmitter
on
Transmitter light
flashingred
Replace transmitter batteries

Shure PGX Wireless Specifications

General

Brand	Shure
Model	PGX Wireless
Category	Microphone system
Language	English