2.4.2. Transmit
Available to adjust transmit speed of input/output in each ports.
2.4.3. Buzzer
It is can be buzzer on/off.
(☞ The default setting is on.)
2.4.4. Backlight time out
It is the screen sets the time to sleep mode.
(☞ The default setting is off.)
2.4.5. Customizing
2.4.5.1. Databar
2.4.5.1.1. Display
Setting up shown/hide the databar on the display.
(☞ The default setting is Shown.)
2.4.5.1.2. Position
Setting up up/down the position of databar on the display.
(☞ The default setting is Down.)