- 93 -
Fish finder modes are selectable for single frequency or dual and some functions.
1.5. Bottom Zoom Range
Select the range of the bottom zoom or lock. It is necessary to modify the bottom.
(☞ The default setting is 10m.)
1.6. Fish symbol
Fish symbol with sizes and levels show for targets.
(*Fish symbol is only for reference. This could be different from the real.)
1.7. Fish size
Setup to display of the size of fish.
(☞ The default setting is Off.)
1.8. Interference Rejection
When there are another boats around you on sailing, your Fish finder could be disturbed to work. The
step of the function is from off to level 2. The bigger number, the more rejection.
(☞ The default setting is OFF.)
1.9. Noise Rejection
Your Fish finder could be disturbed by the engine noise. This function can reject the noise from the
engine or other machinery instruments.
(☞ The default setting is OFF.)
2. Advanced Menu
▶ [MENU] -> Advance
2.1. Display
2.1.1. A-scope
A-scope shows the research under the water by a scope to see the environment under the water.
(☞ The default setting is OFF.)
2.1.2. Image Speed:
Select the speed of Fish finder image from 4X until 1/32X.
(☞ The default setting is 1X.)
2.1.3. White Line
To Next Page
Loading...
