- 94 -
It is necessary to research a detailed fish on the bottom or a seaweed under the sea. The color of the
bottom changes into white or black to see the bottom easier than red.
(☞ The default setting is OFF.)
2.1.4.Depth
Shown/Hidden the depth range on the screen.
(☞ The default setting is shown.)
2.1.5.Depth Font
Select the depth range font size on the screen.
(☞ The default setting is Large.)
2.1.6.TEMP
Shown/Hidden the temperature on the screen.
(☞ The default setting is Hidden.)
2.1.7.TEMP Font
Select the temperature font size on the screen.
(☞ The default setting is Large.)
2.1.8. Image Filtering
This function is reduction of the noise.
(☞ The default setting is On.)
2.2. Color
2.2.1. Color Level
This function adjusts the colors. Make it upper level, the color becomes darker.
(☞ The default setting is OFF.)
2.2.2. Color Rejection
There are 16 color levels for Fish finder. The color bar is on the left of the Fish finder. If the level is
higher, the color of the bar is deleted one by one.
2.2.3. Screen Color
Select he back ground color of the Fish finder for your convenience.
2.3. Pulse
To Next Page
Loading...
