Si-tex SVS-560CF - Page 16

- 16 -
SVS-560/460 Transducer Options
Model #
Beam Angles
Type
Hole Size
250/50/200ST-CX
45º @ 50kHz
11º @ 200kHz
Plastic transom mount w/
depth, spd, temp.
N/A
1700/50/200T-CX
45º @ 50kHz
11º @ 200kHz
Bronze thru hull depth &
temp.
7/8"
500/50/200ST-CX
45º @ 50kHz
11º @ 200kHz
Bronze thru hull depth,
speed, & temperature
2"
P319/50/200T-ES
45º @ 50kHz
12º @ 200kHz
Plastic thru-hull flush mount
with temp
2"
B-60-0 - CX
(for 0º to 7º hull dead
rise)
45º @ 50kHz
12º @ 200kHz
Bronze thru Hull, Tilted
Element Flush Mount, Depth
& Temperature Only
2.375"
B-60-12 - CX
(for 8º to 15º hull dead
rise)
45º @ 50kHz
12º @ 200kHz
Bronze thru Hull, Tilted
Element Flush Mount, Depth
& Temperature Only
2.375"
B-60-20 - CX
(for 16º to 24º hull dead
rise)
45º @ 50kHz
12º @ 200kHz
Bronze thru Hull, Tilted
Element Flush Mount, Depth
& Temperature Only
2.375"
810-15
15ft Transducer Extension Cable
810-30
30ft Transducer Extension Cable
Digital A Cable
Adapter Cable for use with All Dual Freq. CVS-106 Versions
*All SVS Transducers come with a Conxall (Model #CX-128) 8 pin Conn. On the end of the
transducer cable