Fig.16
Grease filter and inlet grille installation
Position the charcoal filter as well as the grease filter on the brackets inside the extraction box and then cover
the opening with the inlet grille.
Note: The charcoal filter is non-washable and must be replaced as required.
To ensure the best performance
from your extractor, the charcoal
filter should be replaced every
3-6 months, dependent on use.
Fig.17
19
Water retainer installation
Insert the water retainer horizontally from the right hand side, ensure it’s aligned with the extraction box and it is
stable. The water retainer needs to be checked and emptied regularly.
Grease filter
Carbon filter
To Next Page
Loading...
