Siargo MF4000 - Product Selection and Order Information; Product Selection; Order Contact and Customer Support

www.Siargo.com MF / FS4000 User Manual 24 | P a g e
6. Product selection and order information
6.1 Product selection
The product part number is composed of the product model number and suffixes indicating the full-
scale flow rate, as well as the other parameters. Refer to the following for details.
MF/FS40 - - - -
6.2 Order contact and customer support
The sales offices and the sales distributors/representatives are listed at the end of this document. For
small quantities, the order can be placed either through the Siargo website: www.siargo.com or the
sales office. For large quantities, please contact the sales office, distributors, or sales representatives.
Siargo is making every effort to ensure the quality of the products. In case of questions and/or
product supports, please contact the customer service listed at the end of the document.
Gas (A – air; B – N
2
O; C – CO
2
; N – N2; O – O2; R- Ar,
for other gases, please contact the manufacturer.
Output: B – RS485; C – RS232; V – 0.5 ~ 4.5 Vdc.
Maximum full scale flow rate (for the value refer to
the table below). If the unit is not SLPM or sccm,
the unit needs to be specified here.
Mechanical connection: R-R1/4”; O4/6/8 one-touch
MF/FS4003: R, O4, O6, O8 available
MF/FS4008: R. one-touch is not recommended.
DN (pipe diameter: 03 or 08)