SIBER PREMIUM DF EVO - Monitor Your Home - Probes; Wireless Controls

I 23
10 MONITOR YOUR HOME
-
PROBES / WIRELESS CONTROLS
The Siber DF EVO unit can be equipped with various (optional) wireless accessories:
• Wireless CO
2
probe
• Wireless Humidity sensor (RH)
• Wireless smart Multicontrol
• Wireless 4-position push-button control
take care of your health and that of your loved ones by monitoring the Air Quality in your home!
The wireless Siber HR (Relative Humidity) Probe controls the relative humidity of the indoor air in the house. It
measures the indoor humidity in damp rooms and sends its measurements via RF (radio frequency) to the Siber DF
EVO Unit. The unit will be able to react and vary the ventilation flow rate suitable for the indoor air quality according
to the information from the probe.
The Siber 4-Position Wireless Push Button Control communicates via RF (radio frequency) with the ventilation unit
and can choose between 4 different positions linked to the unit. It has a dirty filter indicator.
The wireless Siber CO
2
probe monitors the CO
2
level of the air inside the house. It measures the CO
2
in the rooms
of the house and sends its measurements via RF (radio frequency) to the Siber DF EVO Unit. The unit will be able
to react and vary the appropriate ventilation flow rate to ensure the indoor air quality according to the information
from the probe.
The Siber Smart Wireless Multicontrol communicates via RF (radio frequency) with the ventilation unit and can
choose from 5 different flow rate positions linked to the unit. It is a user and installation interface for monitoring
and configuring the connected heat recovery unit. It has multiple functions connected to the Unit.
Siber DF EVO Probes/Control Command (optional)
Wireless multicontrol DFEVOCTRL
Wireless 4-position push-button control DFPULS4B
Wireless CO
2
probe DFEVOCO2
Wireless Humidity sensor (RH)
DFEVOHR