I 24
SIBER DF / INSTALLATION MANUAL
11 SMART CONNECTIVITY
You can turn the dwelling into a smart home (optional) using various available gateways, as well as to connect the unit to your mobile
device with the Siber EVO APP.
• MODBUS
-
RS485
• KNX
-
Evo Connect
• Ethernet bridge (specifies Siber EVO APP connection)
RS485
BMS
11.1 MODBUS - RS485
11.2 KNX
-
EVO CONNECT
RS485
EVO
Connect
BMS
Fuente alim. 24v
Ref. DFEVORFRS485
Ref. DFEVORFRS485 Ref. DFEVOCONNECT
Ref. DFEVOFA24V
» The Siber RS485 device (DFEVORFRS485) connects to the building management system (BMS) via cable, in Modbus language for both
reading and writing data. Collects information from Siber DF EVO units and compatible wireless probes and controllers(DFPULS4B,
DFEVOCTRL, DFEVOCO2 and DFEVOHR) that are linked to this ventilation unit.
» The Evo Connect requires a 24 V power supply for its proper operation.
RS485
EVO
Connect
BMS
Fuente alim. 24v
» The EVO CONNECT device (DFEVOCONNECT) is a modbus / knx converter. It needs to be connected by cable to the gateway (Modbus
- RS485) to translate the information collected by the gateway (Modbus - RS485) and send it by cable to the BMS. Collects
information from Siber DF EVO units and compatible wireless probes and controllers(DFPULS4B, DFEVOCTRL, DFEVOCO2 and DFEVOHR) that
are linked to this ventilation unit.
Power supply. 24 V
EVO Connect
BMS
RS485
To Next Page
Loading...