6 # 88011155/YTW9/2016-03 © SICK AG · Germany · All rights reserved · Subject to change without notice · Irrtümer und Änderungen vorbehalten
Stromlaufplan Anschlusskarte 1 (ID-Sensor 1)/circuit diagram of connecting board 1 (ID sensor 1)
V1: CDM420 for CLV42x / CLV43x / CLV44x /CLV45x / CLV6xx/ ICR84x-2 / ICR85x-2
V2: CDM410 for CLV41x
V3: CDM490 for CLV49x / LMS400
V4: CDM4xx for operation with CMX module for CAN multiplexer
S4: Switch for CAN termination
S5: Switch for CAN_2 termination
S3: Switch for RS485 termination
S2: Switch RS422 <—> RS485
S6: Switch INGND — GND
4-pin to I/O board
4-pin to CMP
to CMF400 bus module
+24V_Heating_Out
+24V_Heating_Out
to CMC module
S7: Switch RS232 CLV41x: Terminal <—> AUX
15-pin D-Sub HD socket to scanner
For MPX module
(no scanner connected)
Wichtig: +24 V* = Versorgungsspannung +24 V nach Schalter S1
und interner Sicherung.
Important: +24 V* = Power supply voltage +24 V behind
switch S1 and internal fuse.
To Next Page
Loading...
