Need help?Do you have a question about the SICK EtherNet/IP SIG350 and is the answer not in the manual?
General| Product Name | SICK EtherNet/IP SIG350 |
|---|---|
| Category | Gateway |
| Protocol | EtherNet/IP |
| Interface | Ethernet |
| Power Supply | 24 V DC |
| Operating Temperature | -10 °C to +55 °C |
| Protection Class | IP20 |
| Housing Material | Plastic |
| Number of fieldbus ports | 1 |
| Ethernet | 10/100 Mbps |
| Supported protocols | EtherNet/IP |
| Configuration interface | Web server |
| Function | Gateway |
| Storage Temperature | -40 °C to +85 °C |
Defines the correct and intended application for the SIG350 device.
Lists prohibited uses and potential hazards of misusing the SIG350.
Essential safety precautions for installation, operation, and maintenance.
Information regarding UL certification and environmental enclosure rating.
Overview of the SIG350's function as an IO-Link Master and its communication capabilities.
Details the EtherNet/IP protocol and its application with the SIG350.
Details the SIG350's support for the IO-Link standard and its communication modes.
Explains the IIoT interfaces (REST API, MQTT, OPC UA) for IT network integration.
Describes the integrated web interface for device configuration and status monitoring.
Identifies physical components and explains the meaning of LED status indicators.
Lists the required conditions and preparations before mounting the SIG350.
Step-by-step guide for mechanically installing the SIG350 module.
Instructions for establishing a proper ground connection for the SIG350.
Information on the cover protecting the rotary switches and its handling.
Lists the items included with the SIG350 module upon purchase.
Safety rules and procedures for connecting the SIG350 in electrical installations.
Detailed pinout for IO-Link, Ethernet, and power ports on the SIG350.
Explains voltage supply, current limits, and distribution for the SIG350.
How ambient temperature affects the device's current carrying capacity.
Methods for assigning an IP address (BootP, DHCP, Static) to the SIG350.
Unique hardware identifier for the SIG350, not user-configurable.
Using rotary switches for manual configuration like IP address and factory reset.
Guidelines for protecting data confidentiality, availability, and integrity.
Connecting SIG350 to a PLC for data exchange via EtherNet/IP.
Using REST API, MQTT, and OPC UA for IT network and IoT integration.
Accessing and navigating the SIG350's web interface for configuration.
Utilizing SOPAS ET for device discovery, configuration, and parameterization.
Procedure to revert the SIG350 to its original factory configuration.
Methods for restarting the SIG350 module to resolve issues.
Steps for updating the SIG350's firmware to the latest version.
Methods for identifying and resolving device errors using LEDs and logs.
Physical dimensions, materials, and mounting details of the SIG350.
Environmental requirements (temperature, EMC) and impact load ratings.
Voltage supply, current consumption, and port current capabilities.
Data on transmission rate, cable length, data handling, and connections.
Information on IO-Link version, connection class, and transmission rates.
To Next Page
