Byte Designation Configuration Data
length
Data
type
Description
82 … 87 S1 port DIO 6 byte ARRAY see table 13, page 37
88 … 93 S2 port DIO 6 byte ARRAY
94 … 99 S3 port DIO 6 byte ARRAY
100 …
105
S4 port DIO 6 byte ARRAY
106 …
111
S5 port DIO 6 byte ARRAY
112 …
117
S6 port DIO 6 byte ARRAY
118 …
123
S7 port DIO 6 byte ARRAY
124 …
129
S8 port DIO 6 byte ARRAY
Table 12: Port configuration
Parameter
name
Attrib‐
utes
Acces
s
Data
type
Information
Port Mode 1 Get/S
et
USINT 0: Deacti‐
vated
Deactivated port.
1: IOL_Man‐
ual
IO-Link port parameterization active:
Single-stage commissioning is used
at this IO-Link port. The explicit port
parameterization for inspection level,
port cycle time, manufacturer ID and
device ID is done in the PLC via the
PROFINET engineering tool.
2: IOL_Autos‐
tart
Automatic IO-Link parameterization:
No explicit port parameterization is
used at this IO-Link port. Basic
assignments such as inspection
level, port cycle time, manufacturer
ID, and device ID are not required.
Corresponding parameters are deter‐
mined by the connected IO-Link
device.
3: DI_C/Q Configuration of pin 4 as digital input
4: DO_C/Q Configuration of pin 4 as digital out‐
put
OPERATION 8
8027834./2022-06-10 | SICK O P E R A T I N G I N S T R U C T I O N S | Sensor Integration Gateway - SIG350
35
Subject to change without notice
To Next Page
Loading...
