Need help?Do you have a question about the SICK FLX3-CPUC200 and is the answer not in the manual?
General| Storage Temperature | -20 °C ... +70 °C |
|---|---|
| Number of Digital Inputs | 8 |
| Number of Digital Outputs | 8 |
| Input Voltage | 24 V DC |
| Output Voltage | 24 V DC |
| Output Current | 0.5 A |
| Operating System | Linux |
| Operating Voltage | 24 V DC |
| Number of Ethernet ports | 2 |
| Ethernet | 10/100/1000 Mbps |
| Communication Interfaces | Ethernet, USB, RS-232 |
| Ambient Operating Temperature | 0 °C ... +50 °C |
| Baud Rate | Up to 115200 bps |
| Protocol | TCP/IP |
| Protection class | IP20 |
| Ambient temperature | 0 °C ... +50 °C |
Provides crucial general safety guidelines, warnings, and specifies intended applications for the safety controller.
Describes the components that make up the safety controller system.
Details the module's interfaces, configuration options, and primary functions.
Explains muting processes, safety notes, wiring considerations, and calculation methods.
Outlines procedures and frequency for thorough device checks during commissioning and regular intervals.
Provides critical safety warnings related to electrical voltage and unintended machine start.
Covers logic editor navigation, inputs, function blocks, and diagnostics.
Explains function blocks for implementing muting sequences.
Outlines checks to ensure hazardous area monitoring and access prevention during commissioning.
Explains the meanings of PWR and CV status indicators and possible fault indications.
Lists common faults, their responses, and potential causes for inputs and outputs.
Describes using Safety Designer for diagnostics and accessing error history.
To Next Page
