Need help?Do you have a question about the SICK UE410-GU and is the answer not in the manual?
General| Type | Safety Controller |
|---|---|
| Power Supply | 24 V DC |
| Safety inputs | 8 |
| Safety outputs | 4 |
| Protection class | IP20 |
| Connection type | Screw terminals |
| Housing material | Plastic |
| Communication Interface | Ethernet |
| Current consumption | 100 mA |
| Output current | 0.5 A |
| Output type | Semiconductor outputs |
Defines the requirements for personnel responsible for mounting, commissioning, and servicing.
Describes the configurable control system for safety applications and its compliance.
Provides essential safety guidelines and directives to follow during installation and use.
Highlights the key characteristics and modular concept of the Flexi Classic series.
Explains the system architecture comprising main modules, extensions, and gateways.
Details the UE410-MU as the main module for system configuration and control.
Describes the UE410-GU as an alternative main module with global emergency stop capabilities.
Explains the UE410-XU as an input/output extension module.
Details the 9 settable programs for configuring safety sensors and logic.
Outlines the 9 programs available for the UE410-GU, including local emergency stop options.
Describes the UE410-8DI for adding 8 safe inputs to the system.
Details the dual-channel contact-based output modules.
Explains the connection and application of RE300 magnetic safety sensors.
Details the connection of IN4000 inductive safety sensors.
Covers the connection and use of testable photoelectric safety switches.
Describes how to configure and use two-hand operation and jog mode functions.
Details how muting overrides safety device protection for material transport.
Details the connection of control inputs for functions like restart interlock and EDM.
To Next Page
