Need help?Do you have a question about the SICK UE410-MU and is the answer not in the manual?
General| Operating Voltage | 24 V DC |
|---|---|
| Safety outputs | 2 |
| Response time | ≤ 20 ms |
| Protection class | IP20 |
| Housing material | Plastic |
| Safety Integrity Level | SIL 3 |
| Performance Level | PL e |
| Number of Outputs | 2 |
| Mounting | DIN rail |
| Supply voltage | 24 V DC |
| Current consumption | ≤ 100 mA |
| Output type | Semiconductor |
| Switching current | ≤ 0.5 A |
| Connection | Screw terminals |
Defines the requirements for personnel qualified to mount, commission, and service the safety controller.
Describes the Flexi Classic's capabilities as a configurable control system for safety applications.
Specifies the intended use of the Flexi Classic safety controller and potential warranty voidance.
Provides essential safety guidelines, standards, and directives for installation and use.
Details the UE410-MU as the primary module for system configuration, inputs, and outputs.
Details the UE410-GU as an alternative main module, including global emergency stop capabilities.
Describes the UE410-XU as an input/output extension module with identical functionality to UE410-MU.
Explains how muting temporarily overrides safety devices for material transport.
Provides instructions for correctly mounting the Flexi Classic modules onto a DIN mounting rail.
Covers general electrical installation requirements, EMC compliance, and wiring guidelines.
Shows a connection example for a global emergency stop system using two UE410-GU modules.
Outlines the essential test points for validating the safety application before commissioning.
Provides guidelines for initial tests, regular testing, and inspections by qualified personnel.
Explains the procedure for accepting and saving the system configuration using the ENTER button.
Guides on how to cease operation, identify faults, and perform functional tests.
Explains the meaning of ERR LED indications and their corresponding rectification steps.
Lists the technical specifications for the UE410-8DI input extension module.
To Next Page