Need help?Do you have a question about the SICK UE410-2RO and is the answer not in the manual?
General| Relay outputs | 2 |
|---|---|
| SIL | SIL3 |
| PL | PL e |
| Output type | Relay |
| Output current | 2 A |
| Protection class | IP20 |
| Connection | Screw terminals |
| Housing material | Plastic |
| Input Voltage | 24 V DC |
| Number of Outputs | 2 |
| Operating Temperature | -20 °C to +60 °C |
| Category | 4 |
| Ambient temperature | -20 °C to +60 °C |
Provides crucial safety warnings related to product integration, mounting, and electrical installation.
Defines the product's intended use, standards it complies with, and limitations for industrial environments.
Outlines the necessary qualifications for personnel involved in project planning, installation, and operation.
Provides a step-by-step guide for mounting modules onto a DIN mounting rail.
Outlines essential electrical installation requirements, including safety standards and voltage considerations.
Details terminal pin assignments and functions for main modules, I/O modules, and accessories.
Describes connecting various devices like sensors, actuators, and switching elements to the Flexi Soft system.
Explains the process of configuring the safety controller using software and system plugs.
Outlines steps for overall application acceptance, including prerequisites and approach.
Details crucial checks to be performed before the initial commissioning of the machine.
Details the importance and procedure for regular checks of the safety function by qualified personnel.
Offers guidance on how to respond to errors and malfunctions in the Flexi Soft system.
Describes different error states (Configuration, Remediable, Serious) indicated by module LEDs.
Explains how error codes and messages are displayed and how to interpret them.
To Next Page