Need help?Do you have a question about the SICK UE410-4RO and is the answer not in the manual?
General| Type | Safety Controller |
|---|---|
| Input Voltage | 24 V DC |
| Safety inputs | 4 |
| Relay outputs | 4 |
| Response time | 10 ms |
| Protection Class | IP20 |
| Output type | Relay |
| Connection type | Screw terminals |
| Housing material | Plastic |
| Operating Temperature | -20 °C to +55 °C |
| Ambient temperature range | -20 °C ... +55 °C |
| Weight | 150 g |
Covers safety notes for product integration, mounting, electrical installation, and configuration.
Specifies the intended use of the Flexi Soft controller and conditions for UL/CSA applications.
Provides instructions for mounting modules on DIN rails and attaching end pieces.
Details electrical installation requirements, safety standards, and EMC measures.
Provides pin assignments for various Flexi Soft modules.
Explains how to connect various sensors, actuators, and safety devices to the Flexi Soft system.
Explains how to connect multiple Flexi Soft stations in a Flexi Link system.
Details how to connect multiple Flexi Soft stations in a Flexi Line system.
Explains the requirements and process for configuring the safety controller.
Covers prerequisites and steps for the overall acceptance of the safety application.
Details checks required before the initial commissioning of the machine.
Explains MS and CV LED indicators for FX3-CPUx main modules.
Outlines procedures for regular checks of safety functions by qualified personnel.
Provides guidance on safely replacing modules and performing function tests.
Provides guidance on immediate actions to take when errors occur.
Describes different error states (configuration, remediable, serious) indicated by LEDs.
Lists error codes, causes, and troubleshooting measures for Flexi Soft systems.
Explains how to calculate response times considering all system paths.
To Next Page
