°
Oper
ate all contact pairs in the same voltage range.
°
Tighten terminals to 0.5 Nm.
4. Pay attention to tightness of the cable entries.
5. Close switch cover and fasten it (tightening torque 0.8 Nm).
6. Close switch cover and fasten it (tightening torque 1.2 Nm).
ELECTRICAL INSTALLATION 6
8020543/17K9/2020-06-08 | SICK O P E R A T I N G I N S T R U C T I O N S | i110 Lock
19
Subject to change without notice
To Next Page
Loading...