What to do if my SICK Barcode Reader has hardware or software faults?
If your SICK Barcode Reader is experiencing issues due to device faults, such as hardware or software malfunctions, it's best to contact SICK Service for assistance.
General| Power Supply | 24 V DC |
|---|---|
| Lens Connection | C-mount |
| Light Source | LED |
| Interfaces | Ethernet, RS-232 |
| Scan Rate | 60 fps |
Provides important information on how to use SICK AG devices.
Outlines the purpose and application of these operating instructions.
Explains symbols and signal words used for warnings and information.
Guides users to additional documentation and resources online.
Describes the intended application and versions of the Lector63x Flex.
Outlines actions considered incorrect use and potential dangers.
Warns about dangers and warranty invalidation from modifications.
Outlines the qualifications needed for safe device operation.
Highlights general safety, electrical, optical radiation, and thermal hazards.
Explains the warning labels on the device for optical radiation.
Details device identification via type label and type code.
Lists the components included in the device's scope of delivery.
Describes device view, illumination, display, and memory card features.
Provides safety notes and recommendations for transporting the device.
Instructions for unpacking and checking the delivery for damage.
Lists conditions and recommendations for storing the device.
General instructions, requirements, tools, and mounting systems.
Instructions for mounting the lens unit on basic devices.
Guides for assembling with C-mount, compact C-mount, and S-mount lenses.
Covers working range, mounting angles, and field of view diagrams.
Provides steps for mounting the device using different systems.
Covers electrical safety, enclosure rating, and wiring prerequisites.
Provides notes on wiring, data cable layout, and interface setup.
Illustrates connection diagrams, pin assignments, and example applications.
Details connecting the device, supply voltage, and protecting cables.
Guides on configuring the device using SOPAS ET software and adjusting settings.
Manually adjusting reading characteristics using device buttons.
Outlines initial setup, parameter management, and data backup procedures.
Lists preventive maintenance tasks and their intervals.
Instructions for cleaning, including window, housing, and associated hazards.
Covers general errors, LED interpretation, system info, and status logs.
Guides on contacting service, repairs, and returning devices.
Explains methods for transferring configuration data to a replacement device.
Provides guidance on environmentally friendly disposal of the device.
Details key features, materials, dimensions, and connections.
Lists readable codes, performance specs, and supported interfaces.
Specifies environmental data like temperature, humidity, and light immunity.
Covers declarations, drawings, and CDB650-204 connection/wiring.
Covers CDM420-0006 connection and wiring for various interfaces.
Details the open source software licenses used by SICK.
To Next Page
