1
Quick-Start
CLV 210...CLV 212 Bar Code Scanner
© SICK AG · Division Auto Ident · Germany · All rights reserved
8 007 825/01-2002
Fig 1. CLV 210...CLV 212 Bar Code Scanner
The CLV 210 to CLV 212, (referred to below as “CLV”), are used for automatic reading and decoding of bar
codes in a stationary reading station. These “Quick Start” instructions describe the procedure for initial setup of
the device with the basic configuration set by the factory. Please refer to the
CLV 210...CLV 212 Operating In-
structions
(no. 8 007 042) for application-specific configurations.
QUICK START
CLV 210...CLV 212 Bar Code Scanner
➌
➋
➊
➍
➏
➎
➏
➐
➎
Contents
Chapter Page
1. Plan view of device ....................................................................................... 1
2. System requirements ................................................................................... 2
3. Scope of delivery ........................................................................................... 2
4. Laser warning ................................................................................................... 2
5. Electrical connection .................................................................................... 2
6. Function of the LEDs ................................................................................... 4
7. User interface ................................................................................................... 5
8. Setup ..................................................................................................................... 6
9. Technical data .................................................................................................. 8
10. Reading field graphs...................................................................................... 9
11. Changing the alignment of the reading window ....................... 10
12. Dimensioned diagram .............................................................................. 11
13. Specimen bar codes for scanning ...................................................... 11
1. Plan view of device
Legend:
➊ Sub D HD plug, 15-pin
➋ LED (function indicators)
➌ Connecting lead
➍ Angle attachment
➎ Threaded M5 mounting hole, 5 mm deep
➏ Angle attachment screws
➐ Reading window
To Next Page
Need help?
General
