What causes incorrect reading pulse on SICK CLV615?
The control of the reading pulse might not be correct or suitable for the object due to device faults (hardware/ software) with the SICK Barcode Reader.
General| Protection Class | IP65 |
|---|---|
| Enclosure Rating | IP65 |
| Storage Temperature | -20 °C to +70 °C |
| Housing Material | Aluminum |
| Interface | RS-232, Ethernet |
| Operating Temperature | 0 °C ... +50 °C |
| Resolution | 0.2 mm |
| Supply Voltage | 10 V DC ... 30 V DC |
| Weight | approx. 500 g |
| Type | Laser Barcode Scanner |
| Scan Rate | 1000 scans/s |
Specifies the device's purpose as an ID sensor for bar codes in industrial settings.
Outlines prohibited uses and conditions to avoid.
Lists qualifications needed for safe device operation and maintenance.
Details risks, especially optical radiation (Laser Class 2).
Factors to consider when selecting an installation site for optimal performance.
Instructions on how to physically attach the device using brackets.
Crucial safety notes regarding incorrect voltage and live parts.
Explains grounding requirements and equipotential bonding for safety.
General guidelines for connecting cables and ensuring proper shielding.
Details pin configurations for various connectors.
Illustrates how to connect the device and peripherals.
Specific instructions for connecting supply voltage and data interfaces.
Covers installation and usage of the device configuration software.
Guides through parameterization and initial setup of the device.
Steps for fine-tuning device alignment and settings.
Advanced settings and options for optimizing device performance.
Lists common errors and their potential causes.
Methods for diagnosing issues using LEDs and system information.
Visualizes the device's reading capabilities at different distances.
To Next Page
